Skip to content
English
  • There are no suggestions because the search field is empty.

Series 1585 load cell connector is broken

 Please confirm if the broken connector is on the load cells or on the circuit. 

  • Disconnect the thrust stand from the power source.
  • When voltage drops below 15 V, approach the stand and visually inspect the load cells. For the Series 1520, there is only one force load cell to inspect; for the Series 1580/1585, you will need to inspect all three load cells.
  • Unplug the connector carefully from the circuit.
  • Inspect if the black crimped connector: check the broken area and if the four-color cables can still connect to the male connectors.
  • If not, you will need to purchase the replacement load cells. We may invite you to visit our online store to purchase replacement load cells: The Series 1520 requires 1 x 5 kgf load cell for the thrust; the Series 1580/1585 requires 1 x 5 kgf load cell for the thrust and 2 x 2 kgf load cells for the torque.