General

• I observed a severe vibration on my stand. What shall I do?
• The value that I measured from the stand is different from the data I obtained from the same stand in the past.
• The thrust that I measured is way too low/high.
• Can I use the same PC for the Series 1585 and the Flight Stand? (Windows OS)
• Series 1585 load cell connector is broken
• Series 1585 load cell seems damaged: cracks, fragments, ripped silicone.
• I found a burnt component on the circuit
• I found a broken connector on the PCB
• Terms of Service
• How to interpret the efficiencies when testing coaxial?
• What is the overall efficiency?
• What is the propeller’s mechanical efficiency?
• What is motor efficiency?
• Can I use the Series 1580/1585 for coaxial testing?
• How to start coaxial tests?
• What is the radial offset distance and how to manipulate this value?
• What is the coaxial distance and how shall I define this value?
• Can I modify the sampling rate in the script?
• What is back-to-back and face-to-face testing and which configuration shall I choose to test?
• The sampling rate is fluctuating during a test
• Can the sampling rate on the thrust stand go higher?
• How to Generate a Debug Report
• The propulsion data that I obtained from the thrust stand is not matching the advertised performance from the motor or propeller manufacturer.