.png?width=150&height=65&name=logo_tyto_robotics_2000_860%20(1).png){kind=logo}
This guideline is dedicated for the cases where you open a CSV file and find there are missing measurements, e.g. thrust, torque, and some derived values while other parameters are being measured properly.
- Please make sure that you download the most up-to-date software.
- Open the RCbenchmark GUI and go to the Setup tab
- In the Working Directory, please make sure the output file will be saved in a local directory but NOT on the cloud:
- If necessary to change the working directory, clock on the … to setup the directory.
- Now run the manual control with continuous recording, or run the automatic script that you made for the tests.
- Open the output CSV file and double check if there is still missing measurement
- Please understand, if you are user of the Series 1580, the load cell sampling rate is limited to 8 Hz, thus there will be measurement points where the stand measure the voltage, current but no torque.
- If you problem persists, please send an email to support@tytorobotics.com and include:
- Subject: CSV output missing measurement
- The output CSV file of a manual test from 0% to 60% throttle (at least 30 seconds)
- Your product
- Version of your product